SIGNATURE SKYLINE
The precision-milled aluminium system for large-format outdoor walls – around 20 % lighter, ultra-flat and exceptionally even.
View productHome / Fixed Outdoor / SIGNATURE MARINA
Special edition · IP66
SIGNATURE MARINA
Outdoor LED for coast, promenade and pool – salt-spray tested, IP66, nano-vacuum coating.
Coastal specialist series for ports, promenades and pools: aluminium cabinet with electrophoretically blackened base shell, nano-vacuum coating on every module, stainless-steel locks and gold-wire-bonded LEDs – uncompromising corrosion-resistance and 12-step factory-tested.
Pixel Pitch 3.91 mmPixel Pitch 4.81 mmPixel Pitch 6.25 mm
In brief
The SIGNATURE MARINA is a WALED LED video wall for outdoor fixed installation. Coastal specialist series for ports, promenades and pools: aluminium cabinet with electrophoretically blackened base shell, nano-vacuum coating on every module, stainless-steel locks and gold-wire-bonded LEDs – uncompromising corrosion-resistance and 12-step factory-tested. Available pixel pitches: P3.91 bis P6.25. Ingress protection: IP66. Brightness: depending on variant 6.000 nits or 5.500 – 6.000 nits or 7.500 nits.
Outdoor LED for coast, promenade and pool – salt-spray tested, IP66, nano-vacuum coating.
On the coast, in the harbour or at the pool, standard outdoor LEDs fail within 12-24 months: salt mist and chloride ions attack aluminium, plastic and solder joints; UV yellows plastics; high humidity accelerates corrosion on the solder side. SIGNATURE MARINA is built entirely against this stress – with multi-layer protection: electrophoretically blackened aluminium base shell (automotive-paint process), nano-vacuum magnetron coating on the modules (95 % light transmission), stainless-steel locks, gold-wire-bonded LEDs and 24-h penetration coating on power supply and receiver card. 12 factory tests including salt spray, UV, immersion and hot/cold cycling secure the TÜV-compliant IP66 rating.
Highlights
What sets the SIGNATURE MARINA apart
Electrophoretic aluminium base shell
Black coating using the same electrophoretic process as car bodies: even, dense, strongly bonded – superior hardness and corrosion resistance against salt mist and chloride ions.
Nano-vacuum magnetron coating on modules
Hydrophobic nano layer (30–50 µm, 95 % light transmission). Improves surface uniformity by 10 %, corrosion resistance by 30 %, significantly higher UV resistance. Passed: ROHS (SGS) + neutral salt spray (NSS).
24-h penetration coating on electronics
Modules, power supplies and receiver cards are coated for 24 h penetration – no water ingress, no salt attack on solder joints or components.
Gold-wire-bonded LEDs for coastal use
LED lamp beads with gold bond wire instead of standard copper: virtually corrosion-free, durable even in chloride-laden air.
Stainless-steel locks · TÜV-IP66
Mechanism lock + screw fixation + lock piece entirely stainless steel. T-connector SMl/F20 with plug-and-socket protection. Front and rear service without corrosion risk.
12-step factory tested
AOI, conformal coating, module potting, air tightness, fire proof, waterproof, water-gun spray, immersion, UV, hot/cold, transport vibration and salt-spray testing in the factory – BEFORE the cabinet leaves the line.
6,500 nits
Peak brightness
3,840 Hz
Refresh rate
IP66
TÜV certified
NSS / salt spray
TÜV + ROHS / SGS
5VB
Fire rating UL94
−30 °C to +50 °C
Coastal operation
Gold-wire LED
Corrosion-free
Electrophoretic black coating of the base shell
Just like a car body: charged paint particles migrate in the electric field to the counter-electrode and deposit evenly, densely and adherently on the aluminium base shell. The result is superior hardness, adhesion and corrosion resistance – even on complex geometries. Black is standard.
Nano-vacuum magnetron coating of modules
In a vacuum, cleaned modules are coated with a high-purity 30–50 µm hydrophobic film (magnetron sputtering). Result: 95 % light transmission, +10 % surface uniformity, +30 % corrosion resistance, significantly higher UV resistance. Eco-friendly nano solution, ROHS certified (SGS), neutral-salt-spray tested.
12-step factory tested – BEFORE the cabinet leaves the line
AOI inspection · conformal coating · module potting · air tightness · fire proof · waterproof · water-gun cabinet · immersion test · UV resistance · hot/cold cycling · transport vibration · salt-spray test. Every MARINA cabinet passes all 12 tests before delivery.
Use cases · coast, harbour, pool, spa
Where standard outdoor LEDs fail within 12–24 months, SIGNATURE MARINA keeps running: beach promenades, marinas, swimming pools, thermal spas, wellness areas, indoor pools with high humidity and chlorine load, coastal façades, promenade kiosks and any outdoor location with salt-mist exposure near the sea.
Technical specifications
SIGNATURE MARINA – Technical specifications
| Parameter | SIGNATURE MARINA P3.91 | SIGNATURE MARINA P4.8 | SIGNATURE MARINA P6.25 |
|---|---|---|---|
| Pixel pitch (mm) | 3,91 | 4,8 | 6,25 |
| LED type | SMD 1935 Copper | SMD 1935 Copper | Sinyopto 2727 Copper (HB) |
| IC | ICND2153S | ICND2153S | CFD335B-CS2033 |
| Module resolution (W × H) | 128 × 64 | 104 × 52 | 80 × 40 |
| Module size (mm) | 500 × 250 | 500 × 250 | 500 × 250 |
| Pixel density (px/m²) | 65.536 | 43.264 | 25.600 |
| Cabinet size (mm) | 1000 × 1000 | 1000 × 1000 | 1000 × 1000 |
| Protection (IP) | IP66 | IP66 | IP66 |
| Brightness (nits) | 6000 | 5500 – 6000 | 7500 |
| Gray scale (bit) | 14 | 14 | 14 |
| Viewing angle (H/V) | 160° / 30°↑ + 60°↓ | 160° / 30°↑ + 60°↓ | 160° / 30°↑ + 60°↓ |
| Refresh rate (Hz) | 3840 | 3840 | 3840 |
| Maintenance | Front | Front | Front |
| Max. power (W/m²) | 580 | 580 | 580 |
| Avg. power (W/m²) | 174 | 174 | 174 |
| Signal input | S-Video, VGA, DVI, HDMI, SDI | S-Video, VGA, DVI, HDMI, SDI | S-Video, VGA, DVI, HDMI, SDI |
| Lifespan (hrs) | 100.000 | 100.000 | 100.000 |
| Operating temperature | -30 bis +60 °C | -30 bis +60 °C | -30 bis +60 °C |
| Operating humidity | 10 – 95 % rF | 10 – 95 % rF | 10 – 95 % rF |
| Certifications | CE, EMC | CE, EMC | CE, EMC |
| Base-shell coating | Elektrophoretisches Schwarz | Elektrophoretisches Schwarz | Elektrophoretisches Schwarz |
| Module coating | Nano-Vakuum (30–50 µm) | Nano-Vakuum (30–50 µm) | Nano-Vakuum (30–50 µm) |
| Nano light transmission | 95 % | 95 % | 95 % |
| LED lamp beads | Gold-Wire-Bonded | Gold-Wire-Bonded | Gold-Wire-Bonded |
| T-connector | SMl / F20 Plug-and-Socket | SMl / F20 | SMl / F20 |
| Lock material | Edelstahl | Edelstahl | Edelstahl |
| Penetration coating | 24 h Modul / Netzteil / RX-Karte | 24 h | 24 h |
| Salt-spray certificate | NSS bestanden (TÜV) | NSS bestanden (TÜV) | NSS bestanden (TÜV) |
| Compliance | ROHS (SGS) · CE · TÜV | ROHS · CE · TÜV | ROHS · CE · TÜV |
Learn more
Background & technology
Related products
More systems in the same category
SIGNATURE RATIO
Outdoor fixed LED with unique 320×320 mm module geometry – pixel-precise 16:9 formats up to 5120×2880 mm, 10,000 nits, IP66, TÜV, 5VB fire-proof.
View product
WALED PYLON
Turnkey LED advertising pylons: steel column built in NRW, foundation per statics, equipped with SIGNATURE RATIO or SIGNATURE 960 panels. End-to-end service including planning support, ABC Finance leasing, installation and 24/7 service.
View productInterested in the SIGNATURE MARINA?
Configure your project now in minutes – instant and non-binding.
Configure your LED wall
FAQ
Frequently asked questions about SIGNATURE MARINA
What is the SIGNATURE MARINA suitable for?
On the coast, in the harbour or at the pool, standard outdoor LEDs fail within 12-24 months: salt mist and chloride ions attack aluminium, plastic and solder joints; UV yellows plastics; high humidity accelerates corrosion on the solder side. SIGNATURE MARINA is built entirely against this stress – with multi-layer protection: electrophoretically blackened aluminium base shell (automotive-paint process), nano-vacuum magnetron coating on the modules (95 % light transmission), stainless-steel locks, gold-wire-bonded LEDs and 24-h penetration coating on power supply and receiver card. 12 factory tests including salt spray, UV, immersion and hot/cold cycling secure the TÜV-compliant IP66 rating.
What pixel pitch does the SIGNATURE MARINA have?
The SIGNATURE MARINA is available with pixel pitches P3.91, P4.81, P6.25. Which pitch suits your project depends on the viewing distance: as a rule of thumb, the pitch in millimetres roughly equals the minimum viewing distance in metres. WALED explains this in detail at www.ledwalls.de/pixel-pitch-erklaert.
What ingress protection does the SIGNATURE MARINA have?
The SIGNATURE MARINA is specified with ingress protection IP66. WALED explains what the individual IP ratings mean and which rating is required for indoor, shop window, outdoor or coastal locations at www.ledwalls.de/ip-schutzklassen-erklaert.
How bright is the SIGNATURE MARINA?
The SIGNATURE MARINA reaches depending on variant 6.000 nits or 5.500 – 6.000 nits or 7.500 nits. Whether this suffices for your location depends on ambient light: 600 to 1,200 nits in a conference room, 1,500 to 2,500 nits in a lobby, 3,500 to 5,000 nits outdoors in shade and 6,000 nits or more in direct sunlight.
What are the SIGNATURE MARINA cabinet dimensions?
Per data sheet – Cabinet size (mm): 1.000 × 1.000. Cabinet dimensions and weight form the basis for structural design, substructure, installation planning and freight calculation. WALED handles the design during project planning.
Is the SIGNATURE MARINA camera-ready?
The SIGNATURE MARINA operates at a refresh rate of 3.840 Hz. For context: 1,920 Hz already looks smooth to the human eye, camera productions in rental and live work typically need 3,840 Hz, and TV studio, film production and xR stages need 7,680 Hz.
Can I rent or buy the SIGNATURE MARINA?
The SIGNATURE MARINA is designed for fixed installation and is sold, planned and installed by WALED. WALED VIDEOWALLS GmbH delivers, installs and services throughout Germany from Duisburg. Request a non-binding quote via the LED wall configurator at www.ledwalls.de/konfigurator or the contact form at www.ledwalls.de/kontakt.