CONFERENCE ALPHA
Plug-and-play LED wall for conference and meeting rooms – brilliant, quiet and ready to go.
View productHome / Conference & POS / PULSE T-PRO SERIE
Retail & POS · foldable
PULSE T-PRO SERIE
More than just an LED poster.
Mobile LED totem for stores, shop windows and trade fairs: a 500 × 2,000 mm display on castors. The upper half folds back through 180° – the totem then works on both sides at half the height.
Pixel Pitch 1.5 mmPixel Pitch 1.9 mmPixel Pitch 2.6 mm
In brief
The PULSE T-PRO SERIES is a mobile LED totem by WALED Videowalls for retail, shop windows, POS, trade fairs and roadshows. A single-sided 500 × 2,000 mm display on lockable castors; the upper half folds back through 180° to create a double-sided wall at half the height. Available pixel pitches: P1.5, P1.9, P2.6. Ingress protection: IP65 (front) / IP20. Brightness: 600–1,000 cd/m². Transported two at a time in a flight case.
More than just an LED poster.
The Pulse T-Pro Series is the LED answer to the classic in-store poster. A display on a base with lockable castors, pushed into position without tools, playing whatever needs promoting. The hinge at half height has two states: opened out, a single-sided totem with a continuous 500 × 2,000 mm surface; folded, a double-sided wall with 500 × 1,000 mm per side. Folded is also how two units travel in one flight case.
Highlights
What sets the PULSE T-PRO SERIE apart
Two states: opened out or folded
Opened out, the totem shows a continuous single-sided surface of 500 × 2,000 mm. Folded, the upper half sits 180° behind the lower one – the wall then plays to both sides, but at half the height.
For shop windows and the sales floor
Portrait format, small footprint, no building work: the totem fits shop windows, checkout zones, aisles and entrance areas without anything being mounted.
Mobile on lockable castors
Four castors in the base, lockable: roll the totem forward for a promotion and out of the way afterwards. Repositioning takes seconds.
Central control via the cloud
Manage content for every location from one dashboard and publish on a schedule – store campaigns start everywhere at once, with no site visit.
HOB modules, IP65 on the display side
The multi-layer protection concept of the HOB modules guards against water, humidity, impact and dust – built for areas with foot traffic and daily cleaning.
Three pixel pitches
P1.5 in COB for close-up shop window viewing, P1.9 and P2.6 in SMD for greater viewing distances and more brightness – same housing, same logistics.
up to 1,000 cd/m²
Brightness
up to 7,680 Hz
Refresh rate
IP65 front / IP20
Protection
Two states: opened out or folded
The hinge sits at half height, and the upper half swings back on it – clearly visible in the photo. Opened out, the Pulse T-Pro is single-sided and shows a continuous 500 × 2,000 mm portrait display. Folded, the two halves sit back to back: the wall then plays to the front and to the rear with 500 × 1,000 mm each, at half the height. There are no other states, and no tools are needed to switch.
The totem in store and in the shop window
Two square metres of advertising space on a 518 × 588 mm footprint: the totem replaces the printed poster wherever the artwork changes often – in the window, at the checkout, in the entrance, on the sales floor. No print, no snap frame, no disposal. New artwork reaches every location at once through cloud control, with nobody needing to be on site.
Several totems make a wall
Two or more totems side by side form a continuous image wall – no truss, no substructure, no structural calculations. Position, align, connect, switch on – and take it apart again just as quickly after the promotion.
HOB modules: protected against water, dust and impact
The HOB modules offer high thermal stability and adapt to varying ambient conditions. The multi-layer protection concept covers water, humidity, impact and dust; with IP65 front protection, image quality stays stable even where floors get mopped and crowds get close. P1.5 additionally uses COB encapsulation and 20,000:1 contrast.
Flight case for two totems
Each flight case is designed for two folded totems. The door folds all the way down and serves as a loading and pull-out panel, so the units slide out without lifting. A dedicated compartment holds spare parts, and a dust cover protects the totem between promotions even when it stays assembled.
Technical specifications
PULSE T-PRO SERIE – Technical specifications
| Parameter | P1.5 | P1.9 | P2.6 |
|---|---|---|---|
| Pixel pitch | 1,5625 mm | 1,95 mm | 2,6 mm |
| Pixel density | 409.600 dot/m² | 262.144 dot/m² | 147.456 dot/m² |
| LED sealing type | COB | SMD1212 | SMD1515 |
| Contrast ratio | 20.000:1 | 8.000:1 | 8.000:1 |
| Brightness | 600–800 cd/m² | 800–1.000 cd/m² | 800–1.000 cd/m² |
| Grey scale | ≥ 14 Bit | ≥ 14 Bit | ≥ 14 Bit |
| Refresh rate | 3.840 Hz | 7.680 Hz | 7.680 Hz |
| Horizontal viewing angle | 160° | 160° | 160° |
| Vertical viewing angle | 160° | 160° | 160° |
| Max. power consumption | 300–360 W/m² ±3 % | 400–540 W/m² ±3 % | 400–540 W/m² ±3 % |
| Average power consumption | 120 W/m² | 120–180 W/m² | 120–180 W/m² |
| Module size | 250 × 250 mm | 250 × 250 mm | 250 × 250 mm |
| Module resolution | 160 × 160 px | 128 × 128 px | 96 × 96 px |
| Screen resolution | 320 × 1.280 px | 256 × 1.024 px | 192 × 768 px |
| Screen size | 500 × 2.000 mm | 500 × 2.000 mm | 500 × 2.000 mm |
| Poster size (W × H × D) | 518 × 2.140 × 588 mm | 518 × 2.140 × 588 mm | 518 × 2.140 × 588 mm |
| Poster weight | 30 kg | 30 kg | 30 kg |
| Input voltage | AC 100–240 V | AC 100–240 V | AC 100–240 V |
| Working temperature | −20 bis +50 °C | −20 to +50 °C | −20 bis +50 °C |
| Working humidity | 10–90 % RH | 10–90 % RH | 10–90 % RH |
| Maintenance type | frontseitig | frontseitig | frontseitig |
| Life span | > 100.000 Stunden | > 100.000 Stunden | > 100.000 Stunden |
| Ingress protection | IP65 / IP20 | IP65 / IP20 | IP65 / IP20 |
| Working environment | Indoor | Indoor | Indoor |
* Display area 500 × 2,000 mm, single-sided, when opened out. Folded, the totem works on both sides with 500 × 1,000 mm each at half the height. Ingress protection IP65 on the display side, IP20 at the rear. All data per the Pulse T-Pro Poster Series manufacturer data sheet.
Learn more
Background & technology
Related products
More systems in the same category
CONFERENCE RATIO
True 16:9 conference walls with 600 × 337.5 mm and 1000 × 562.5 mm cabinets – pixel-perfect for Full HD, 4K and 8K, quick to install and razor-sharp.
View product
VUEX ONE
Mobile all-in-one display on castors – roll in, switch on, present. Perfect for foyers and retail.
View productInterested in the PULSE T-PRO SERIE?
Configure your project now in minutes – instant and non-binding.
Configure your LED wall
FAQ
Frequently asked questions about PULSE T-PRO SERIE
What is the PULSE T-PRO SERIES suitable for?
For retail and store concepts: shop windows, sales floors, checkout zones, entrances and reception areas, plus hospitality, trade fair booths, roadshows and events. In short, wherever an advertising surface has to stay mobile, go up without building work and change its artwork often.
Is the PULSE T-PRO single- or double-sided?
Single-sided. Opened out, the totem shows a continuous 500 × 2,000 mm display to the front. Fold the upper half back through 180° and the wall works on both sides with 500 × 1,000 mm each, at half the height. Those are the two possible states; switching needs no tools.
What pixel pitches does the PULSE T-PRO SERIES offer?
Three models: P1.5 (1.5625 mm) with COB encapsulation, P1.9 (1.95 mm) with SMD1212 and P2.6 (2.6 mm) with SMD1515. Which pitch makes sense depends on viewing distance: as a rule of thumb, the pitch in millimetres roughly equals the minimum viewing distance in metres. For a shop window with passers-by close to the glass, P1.5 is the right choice. WALED explains this in detail at www.ledwalls.de/pixel-pitch-erklaert.
What ingress protection does the PULSE T-PRO SERIES have?
The display side is specified as IP65, the rear as IP20; the data sheet lists indoor as the working environment. For shop windows, sunlight behind the glass also has to be taken into account. WALED explains what the individual IP ratings mean at www.ledwalls.de/ip-schutzklassen-erklaert.
How bright is the PULSE T-PRO SERIES?
P1.5 reaches 600–800 cd/m², P1.9 and P2.6 reach 800–1,000 cd/m². That is sufficient on the sales floor and in entrance areas. The series is not designed for a shop window in direct southern sun – WALED offers brighter window and outdoor systems for that.
How is the PULSE T-PRO SERIES transported?
Folded, two totems fit into one flight case. The door folds all the way down and acts as a loading and pull-out panel, so the units slide out without lifting. A separate compartment holds spare parts. One totem weighs 30 kg and measures 518 × 2,140 × 588 mm.
How does new artwork get onto the totem?
Via cloud control: content is uploaded centrally, assigned to a totem or a group of stores and published on a schedule – by laptop, network or mobile data. No site visit is required to change the artwork.
Can I rent or buy the PULSE T-PRO SERIES?
Both. For promotions, trade fairs and roadshows the totem can be hired by the day or per project; for permanent store concepts, purchase makes more sense. WALED VIDEOWALLS GmbH delivers, installs and services throughout Germany from Duisburg. Request a non-binding quote via the LED wall configurator at www.ledwalls.de/konfigurator or the contact form at www.ledwalls.de/kontakt.